Ultimate Guide of Fire Ratings for Gun Safes

Home explosion, if you have it, is a massive threat to your products and your weapons. Gun safes are a perfect way to guard guns and valuables from fire hazards. Gun safes like stack on fire resistant gun safe are either Underwriter or ETL ltd certified.

Many people ask about how safes get their scores for fire. When looking for a safe arm, the gunmen reach safes with a host of fire ratings but don’t understand the significance of the fire ratings.

Fire-Rating Overview

A fire rating indicates how long the safe can hold the contents safe, up to and against the fire. Typically, an X min (or hours) / Y? fire rating is written? F(or ?C). This means the protection will cover the material up to Y? temperatures for X minutes.

What components can be used for fire safety in gun safes?

1. Fireboard

Today, fireboard gun safes are available on the market. This can be 1/4 to 5/8 inches thick in this fireboard. It has a moisture measurement in which the humidity is released when heated in a fire. This method preserves the inside of the secure cooler for a longer time. The longer the fireboard layers, the colder it will be.

2. Composite Material

Often protective boxes are fitted with a composite material between two steel layers. It’s like a form of concrete, except it’s usually a little lighter. This substance serves as an insulator that stops heat from entering the protection interior in the event of a flame.

3. K-Wool

Some industries use K-wool as another kind of insulator built-in safes in the shape of a blanket. It is used to separate pipes so a curved surface can easily be created.

How is the Fire Rating Checked for Gun Safes?

The UL is one of the most recognised and valued certifiers of gun safety equipment for fire ratings. They supply U.L. Label/class 350 ° F-one hour and fire rating of class 350 ° F-two hours.

When exposed to fire for one hour at 1700 ° F or for two hours at 1850 ° F, the safe can retain an internal thermal temperature of less than 350 ° F. The safe must pass a host of fire evaluation checks successfully.

Endurance Test

One of the primary measures for certifying fire ranking is the fire endurance test. The device is locked and exposed to a widely spread fire as heat sensors and paper are put into the safe.

The furnace is operated to exceed 1700 ° F or 1850 ° F for one hour or two hours and then helps it to cool without opening the furnace.  During the test and the cooling process, the internal temperature is registered until a specific decrease is seen and never reaches 350 ° f.

Fireproof Gun-Safes

Of course, there’s no 100% fire-resistant gun safe in the market today. Everything depends on the material of the gun safe, but most units can fail if they are made of soft material at any point. It is therefore difficult to equate a fire situation with a fire situation because two are not similar. A poorly designed weapons safe might, in theory, lead to a significant fire without destroying anything indoors, whereas a thick steel safety could have reached the limit of the fire. Consequently, the other concern is how the gun is designed to avoid fire.